SS904L Sheet | SS904L Shim Sheet | SS904L Thin Sheet | SS904L Mirror Finish Sheet | SS904L Perforated Sheet | SS904L Brushed Sheet | SS904L Polished Sheet  | ASTM B625 UNS N08904

Oshwin Overseas is one of the leading 904L Stainless Steel Sheet Suppliers and Steel Sheet Manufacturers. Oshwin Overseas supply wide range of stainless steel sheets that are made of various materials like cut material, boiler grade plate, coil plate and floor plate, etc. We are a professional manufacturer of stainless steel sheet and provide all international standards like ASTM, JIS and AISI, GB Standards.

Oshwin Overseas offers 904L Sheet in different types of thickness, specification, grades and dimensions like ASTM B625 and Steel Sheet Sizes in mm – Thin Steel Sheet, ¼ Steel Sheet, 1mm Steel Sheet, 2mm Steel Sheet, 3mm Steel Sheet, 5mm Steel Sheet, 1 inch Steel Sheet. Oshwin Overseas also supplies Perforated Stainless Steel Sheet, Brushed Stainless Steel Sheet, Polished Stainless Steel Sheet, Diamond Plate Steel Sheets.

SS904L Sheet Specification –

Grade: SS 904L /  WNR 1.4539 / UNS N08904 / AISI 904L / SUS 904L / INOX 904L / Alloy 904L / URANUS B6 / SEW 400 / 2RK65 / RVS 904L

Specifications: ASTM, ASME and API

Standards: ASTM B625 / ASTM B625 – 04

Range: 5mm to 150mm

Length: 1000mm above

Size Range: 1000 mm x 2000mm, 1220mm x 2440mm, 4′ x 8′, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm

Thickness: 0.3mm to 100mm / 0.1874” to 0.015”

Width: 100mm to 6000mm

Specialize: Shim Sheet, Perforated Sheet, B. Q. Profile.

Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Type or Form: Coils, Foils, Shim Sheet, Perforated Stainless Steel Sheet, Diamond Plate Steel Sheets, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray Etc.

Finishing: 2B, 2D, HR, CR, BA, CRCA, Satin (Met with Plastic Coated), Brushed Stainless Steel Sheet, Polished Stainless Steel Sheet, Hot rolled plate (HR) and Cold rolled (CR).

Condition: Cold Drawn & Polished Cold Drawn, Centre-less Ground & Polished.

904L SS sheets are used for loads of purposes like column base, sheaves, press frames, in hospitals, refrigeration, solar plants, water heater, interior decoration and machine base. Steel Sheet can be used in minimum temperature as well as in higher temperature because they have the perfect strength levels. Oshwin Overseas enhances effectiveness and of quality control from selecting the raw materials, cutting, slitting, shearing, surface treatment, packing, exporting of the existing products. Test certificates are supplied on all material delivered.

SS904L Stainless Steel Sheet Corrosion Resistance

SS904L gives good resistance to both organic and inorganic acids.The addition of copper in 904L grade gives excellent corrosion resistance against nickel stainless steels, to sulfuric, phosphoric, acetic acids, hydrochloric acids, etc. It also gives a high resistance to pitting in chloride solutions, an excellent resistance to both crevice and stress corrosion cracking.The 904L is much better than authenticate stainless steels due to the higher alloying of nickel and molybdenum.The high percentage of chromium content in 904L gives and maintains a passive film which protects the material in many corrosive environments.

SS904L Stainless Steel Sheet  Cold Forming

Cold forming 904L can be done easily. The composition of molybdenum and nitrogen implies more powerful processing equipment may be needed.Most of the time more common methods like cooling with air or water etc are used.

SS904L Stainless Steel Sheet Hot Forming

Hot and heat forming should be done after uniform heating.Complete annealing should be done before any hot forming in order to retain maximum ductility and corrosion resistance property. It is very important that the whole process should be done above 1100°C.

SS904L Stainless Steel Sheet  Machining

The machining of  904L  requires proper care to achieve the expected result. The cutting speed should be slow and proper care should be taken while doing so.

SS904L Stainless Steel Sheet  Welding

The 904L material should be allowed to cool in between, preferably to below 150°C temperatures. To obtain good welding properties welded condition, filler material shall be used.Because of high thermal expansion, welding must be carefully planned in advance to ensure that distortion of the welded joint can be kept under control.

SS904L Stainless Steel Sheet  Heat Treatment

The heat treatment should be accompanied by cooling in water or air immediately. This treatment should be applied for both solution annealing and stress relieving from the 904L material.

Oshwin Overseas, SS904L Sheet Suppliers, Manufacturer, Stockist

Oshwin Overseas is a renowned Supplier and Manufacturer of 904L Stainless Steel Sheet Plate, 904l Forging, 904l Fasteners, etc. Oshwin Overseas also provides various documents along with material such as test certificate , EN 10204 3.1, NACE MR 01075, 100% Radiography Test Report.Even we provide various inspection from Tecnimont ICB Limited(ICB), DET Norske Veritas (DNV), Fact Engineering And Design Organisation (FEDO), Nuclear Power Corporation Of India Ltd. (NPCL) and more. Testing such as PMI Testing, Pitting Resistance Test, Micro and Macro Testing.