904L Plate | ASTM B625 | Plate Steel | Diamond Plate Steel Sheets | Flat Steel Plate | 904L Plate Suppliers and Dealers

Oshwin Overseas is one of the leading 904L Stainless Steel Plate Suppliers. We are a professional manufacturer of 904L Plate and maintain all the international standards like ASTM, JIS and AISI, GB Standards. Oshwin Overseas supply wide range of Stainless Steel Plate that are made of various materials like cut material, boiler grade plate, coil plate and floor plate, etc.

Oshwin Overseas offers 904L Steel Plate in different type, Stainless Steel Plate Thickness, specification, grades and 904L steel plate dimensions like Stainless Steel Plate Sizes – ¼ Steel Plate, 3mm Steel Plate, 10mm Steel Plae, 5mm Steel Plate, 6mm Steel Plate, 1 inch Steel Plate, 4mm Steel Plate, 8mm Steel Plate, 20mm Steel Plate, 12mm Steel Plate, 2mm Steel Plate, 15mm Steel Plate. Oshwin Overseas also supplies Perforated Stainless Steel Plate, Brushed Stainless Steel Plate, Polished Stainless Steel Plate, Diamond Plate Steel Sheets.

Stainless Steel 904L Plate Specification –

Grade: SS 904L /  WNR 1.4539 / UNS N08904 / AISI 904L / SUS 904L / INOX 904L / Alloy 904L / URANUS B6 / SEW 400 / 2RK65 / RVS 904L

Specifications: ASTM, ASME and API

Standards: ASTM B625 / ASTM B625 – 04

Range: 5mm to 150mm

Length: 1000mm above

Size Range: 1000 mm x 2000mm, 1220mm x 2440mm, 4′ x 8′, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm

Thickness: 0.3mm to 100mm / 0.1874” to 0.015”

Width: 100mm to 6000mm

Specialise: Shim Plate, Perforated Plate, B. Q. Profile.

Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Type or Form: Coils, Foils, Shim Plate, Perforated Stainless Steel Sheet, Diamond Plate Steel Sheets, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray Etc.

Finishing: 2B, 2D, HR, CR, BA, CRCA, Satin (Met with Plastic Coated), Brushed Stainless Steel Plate, Polished Stainless Steel Plate, Hot rolled plate (HR) and Cold rolled (CR).

Condition: Cold Drawn & Polished Cold Drawn, Centre-less Ground & Polished.

904L Stainless Steel Plate are used for loads of purposes like column base, sheaves, press frames, in hospitals, refrigeration, solar plants, water heater, interior decoration and machine base. Steel Plate can be used in minimum temperature as well as in higher temperature because they have the perfect strength levels. Oshwin Overseas enhances effectiveness and of quality control from selecting the raw materials, cutting, slitting, shearing, surface treatment, packing, exporting of the existing products. Test certificates are supplied on all material delivered.

904L Plate Corrosion Resistance

904L gives good resistance to both organic and inorganic acids.The addition of copper in 904L grade gives excellent corrosion resistance against nickel stainless steels, to sulphuric, phosphoric, acetic acids, hydrochloric acids, etc. It also gives a high resistance to pitting in chloride solutions, an excellent resistance to both crevice and stress corrosion cracking.The 904L is much better than austenitic stainless steels due to the higher alloying of nickel and molybdenum.The high percentage of chromium content in 904L gives and maintains a passive film which protects the material in many corrosive environments.

904L Plate  Cold Forming

Cold forming 904L can be done easily. The composition of molybdenum and nitrogen implies more powerful processing equipment may be needed.Most of the time more common methods like cooling with air or water etc are used.

904L  Plate  Hot Forming

Hot and heat forming should be done after uniform heating.Complete annealing should be done before any hot forming in order to retain maximum ductility and corrosion resistance property. It is very important that the whole process should be done above 1100°C.

904L Plate  Machining

The machining of  904L  requires proper care to achieve the expected result. The cutting speed should be slow and proper care should be taken while doing so.

904L Plate  Welding

The 904L material should be allowed to cool in between, preferably to below 150°C temperatures. To obtain good welding properties welded condition, filler material shall be used.Because of high thermal expansion, welding must be carefully planned in advance to ensure that distortion of the welded joint can be kept under control.

904L Plate  Heat Treatment

The heat treatment should be accompanied by cooling in water or air immediately. This treatment should be applied for both solution annealing and stress relieving from the 904L material.

SS 904L Plate price:

• US $15,000 ~ $17,000 – Per Ton

SS 904L Plate Specifications:

904L Stainless Steel Plate Dimensions:

904L Stainless Steel Physical properties:

904L Stainless Steel Chemical Composition:

904L Stainless Steel Sheet Mechanical Properties:

Oshwin Overseas, SS 904L Plate Manufacturer and Dealer:

Oshwin Overseas is a renowned Manufacturer and Dealer of 904L Stainless Steel Plate, Oshwin Overseas also provides various documents along with material such as test certificate , EN 10204 3.1, NACE MR 01075, 100% Radiography Test Report.Even we provide various inspection from Tecnimont ICB Limited(ICB), DET Norske Veritas (DNV), Fact Engineering And Design Organisation (FEDO), Nuclear Power Corporation Of India Ltd. (NPCL) and more. Testing such as PMI Testing, Pitting Resistance Test, Micro and Macro Testing.